
NOTE: A supernet route is a route that covers a range of subnets with a single entry.
NOTE: The ip classless command is enabled by default in Cisco IOS Software Release 11.3 and later.
RIP Routing: Mandatory Commands

NOTE: You need to advertise only the classful network number, not a subnet:
Router(config-router)#network 172.16.0.0
not
Router(config-router)#network 172.16.10.0
If you advertise a subnet, you will not receive an error message, because the router will automatically convert the subnet to the classful network address.
RIP Routing: Optional Commands


Troubleshooting RIP Issues

Configuration Example: RIPv2 Routing

Cancun Router


Acapulco Router

Mazatlan Router


No comments:
Post a Comment